Electric Stud Finder, Multi Wall 3 in 1 Handheld Stud Detector Scanner Edge/Center-Finding with LCD Screen for AC Live Wire, Metal, Wood, StudSensor with Deep Detecting and Beeping Signal Alert

£30.00 (as of July 22, 2018, 3:30 pm) & FREE Shipping. Details

▶Make detection work precise and easier: →①Deep Mode detects empty gap or big air exhaust holes up to 1.77 inches (45mm) depth. →②Stud Mode detects the wooden beams inside the wall up to 1.2 inches (30mm) depth. →③Metal Mode detects the nails, metal pipes and hidden metal objects behind the wall up to 1.57 inches (40mm) depth. →④AC Mode detects the live electrical wires inside the wall up to 2.36 inches (60mm) depth.
▶Multi Finder with strong built-in sensor: ☞It’s a good helper for home improvement to know your wall better before wall needs to be drilled in home decoration.
▶Functionality: ☞Quickly locates edges and center of metal studs, pipes, rebars, joists behind walls, floors and ceilings, also indicates the presence of live AC wire.

Category:

Description


Fetanten Stud Finder, 4 In 1 Handheld Stud Detector Scanner with LCD Screen for AC Live Wire, Metal, Wood
StudSensor with Deep Detecting and Beeping Signal Alert

Note
If you insert the battery and the product device can not work, please don’t worry and here are the ways to solve it
▶1.Please check if the battery is run down, if yes, you should change a new battery.
▶2.If you changed a new battery and it still didn’t work, it maybe the product has not been completely discharged.
So please install the battery in reverse direction for 3 seconds, and repeat this twice, then correct the installation.

Specification
▶Stud-scan: 1.2 inches (3cm) depth
▶Metal-scan: 1.57 inches (4cm) depth
▶Deep-scan: 1.77 inches (4.5cm) depth
▶AC(current)-scan: 2.36 inches (6cm) depth
▶Unit Size: 3*5.9*1.3 inch
▶Product VA size: 1.7*1.3 inch
▶Power supply: 1 * 9V battery (Not included)
▶With LCD display and BI BI sound indication
▶Button tone and Low battery indicator
▶Auto-Off: power off without operation after 60 seconds.

How to Use Stud Sensor
Only three buttons:
①first select the probe type
②next press and hold the “PUSH”button till it sounds BI BI BI, then scan horizontally across the object surface
③Graphical LCD and continuous BI BI sounds reminding you of the stud’s location.
✲(If electrical lines are shielded by metal cladding, please select Metal mode.)

Package
1* Multi Stud finder Scanner
1* Operation Manual
1* Warranty Card

▶Make detection work precise and easier: →①Deep Mode detects empty gap or big air exhaust holes up to 1.77 inches (45mm) depth. →②Stud Mode detects the wooden beams inside the wall up to 1.2 inches (30mm) depth. →③Metal Mode detects the nails, metal pipes and hidden metal objects behind the wall up to 1.57 inches (40mm) depth. →④AC Mode detects the live electrical wires inside the wall up to 2.36 inches (60mm) depth.
▶Multi Finder with strong built-in sensor: ☞It’s a good helper for home improvement to know your wall better before wall needs to be drilled in home decoration.
▶Functionality: ☞Quickly locates edges and center of metal studs, pipes, rebars, joists behind walls, floors and ceilings, also indicates the presence of live AC wire.
▶Advantages of our TS005 Handheld Detector: →①LCD shows easy reading. →②Suitable for indoor decoration use. →③When detect metal, wood or AC wire, the detector has sound alarm, and shows analog display. →④Can detect metal, STUD, AC wire inside the wall. →⑤Anti-skid design, use wave-shaped design, allowing users to better use, to prevent slipping.
▶Note: ☞It can’t work on lath, plaster walls and direct current; Detection depth can vary due to wall moisture; Item’s rusty condition may affect probing results.

Additional information

Binding

Brand

EAN

EAN List

Label

Manufacturer

MPN

Part Number

Product Group

Publisher

Studio

UPC

UPC List