Fetanten Wall Stud Sensor, 4-in-1 Digital Multi-function Electronic Wood Drywall Detector Finder for Metal, Studs, Deep and AC Live Wires, Sound Warning
Stud-scan:1.2 inches (3cm) depth
Metal-scan:1.57 inches (4cm) depth
Deep-scan:1.77 inches (4.5cm) depth
AC(current)-scan:2.36 inches (6cm) depth
Unit Size:3*5.9*1.3 inch
Product VA size:1.7*1.3 inch
Power supply: 1 * 9V battery (Not included)
With LCD display and BI BI sound indication
Button tone and Low battery indicator
Auto-Off: power off without operation after 60 seconds.
How to Use Stud Sensor
Only three buttons ,first select the probe type ,next press and hold the “PUSH”button till it sounds BI BI BI, then scan horizontally across the object surface. Graphical LCD and continuous BI BI sounds reminding you of the stud’s location. (If electrical lines are shielded by metal cladding, please select Metal mode.)
1* Multi Stud finder Scanner
1* English Operation Manual
1* Warranty Card
If you insert the battery and the product device can not work , please don’t worry and here are the ways to solve it
1.Please check if the battery is run down , if yes , you should change a new battery.
2.If you changed a new battery and it still didn’t work , it maybe the product has not been completely discharged .So please install the battery in reverse direction for 3 seconds , and repeat this twice ,then correct the installation.
4-in-1 Multi-function edge-finding Stud scanner mode: Stud, metal, deep and AC. (It can not be used for Direct current)
Easily and Quickly locates edges and center of stud sensor metal studs, pipes,wooden beams ,rebar , current behind walls, floors and ceilings, also indicates the presence of live AC wire .
Stud mode finds the edges and center of wood beam in wall up to 1.2 inches(3cm) deep; Metal mode finds the detects metal, such as pipe , rebar , copper, and aluminum,up to 1.57 inches (4cm); AC mode finds live AC wire lines, up to 2.36 inches (6cm); Deep mode finds the depth up to 1.77 inches(4.5cm)
How to use:Only three buttons,first select the probe type, next press and hold the “PUSH”button till it sounds BI BI BI, then scan horizontally across the object surface or try to scan it up and down. Graphical LCD and continuous BI BI sounds reminding you of the stud’s location
Low battery indicator, 1x9V battery. If you know that there are lines in a particularly location, but you can not find them with the sensor in “AC” mode, then use “METAL” mode. Electrical lines may be shielded by metal cladding. (Battery is not included)